Possesses a recognized degree, certificate, or professional standing, or,.OSHA defines a qualified person as one who: The training must enable employees to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. Scaffold users are workers whose work requires them to be supported by scaffolding to access the area of a structure where that work is performed.Įmployers are required by OSHA standards to have a qualified person provide training to each employee who performs work while on a scaffold. Determining the maximum load for the scaffold.Determining the type of scaffold necessary for the job.By extensive knowledge, training, and experience has successfully demonstrated the ability to solve or resolve problems relating to the subject matter, the work, or the projectĪ qualified person must do adequate preplanning to assure the safe erection and use of the scaffold.Possesses a recognized degree, certificate, or professional standing, or.Scaffolds must be designed by a qualified person and be constructed and loaded in accordance with that design. Requirements for Designing and Constructing Scaffolds Has authorization to take prompt corrective measures to eliminate such hazards.Is capable of identifying existing and predictable hazards.A competent person is defined as one who: OSHA requires employers to provide training by a competent person to each employee who is involved in erecting and/or disassembling a scaffold. Training and Competent Person Requirements *Side note: The stall load of a hoist is the amount of load that causes an motorized hoist to stall or disconnect its power supply.Erectors and dismantlers are workers whose principal activity involves assembling and disassembling scaffolding before other work can begin, and after that work, or a portion of it, has been completed. The outriggers, cornice hooks and other anchoring components of a swing stage scaffolding system must be attached to surfaces which are able to bear at least four times the weight of the maximum rated load of the swing stage or one and a half times the stall load of the hoist, which ever is greater. They must be able to support at least six times the force generated by the scaffold platform and components operating at either the maximum rated load of the platform or at least double the stall load* of the hoist, whichever is greater. Suspension ropes and cables have even more stringent load bearing requirements.
The extra load capacity is meant as a safety cushion during operation. Although the components must be a little over-built to meet the OSHA specs, the maximum load should not be exceeded.
Swing stage scaffold safety checklist plus#
Scaffold components must be able to bear up to their own weight plus at least four times their maximum allowable load. Here is a brief summary of the requirements for the materials and construction of a swing stage. Every year, hundreds, perhaps thousands of workers risk injury on jury-rigged or otherwise inadequate work platforms. OSHA requirements for swing stage scaffolding is meant to ensure the safety of the workers both on the scaffolding platform and on the ground. Color Coding, Safety & Directional Markings.
0 kommentar(er)
